Pipe Claws
Sasco Pipe Claws are designed to grab on to tube, pipe or hose and hold it in place. The unique one-piece patent pending design allows for quick, simple and easy installation. They will not rust because they are molded from TPE (thermoplastic elastomer).
- Quick, simple and easy snap-in of tube, pipe or hose. No tools required.
- Sure Grip base easily rotates into Strut Channel. No tools required.
- TPE (thermoplastic elastomer) will not corrode, and is non-conducting.
- Temp. range of
-46 to 135 °C(-50 to 275 °F). - Works great for interior and exterior applications.
- Seven sizes of tube, and three sizes of EMT.
- Designed for light duty loads and applications.
- Prevents galvanic corrosion of dissimilar metals.
- An excellent alternative to plain, stainless, hot dip galvanized, pregalvanized steel, or aluminum clamps.
Installation on Strut:
Insert pipe claw
Twist to lock
Align pipe
Snap in place
Installation on Surfaces:
Position clamp
Mount with #10 screw and tighten
Align pipe, snap in
Design Loads:
Sasco Pipe Claw for Strut Mounting
For Pipe |
D (diameter) |
Catalogue |
|
(Inches) |
(Inches) | (mm) | |
1/4 OD | 0.250 | 6.35 | S14OD-CL |
3/8 OD | 0.375 | 9.53 | S38OD-CL |
1/2 OD | 0.500 | 12.70 | S12OD-CL |
5/8 OD | 0.625 | 15.88 | S58OD-CL |
3/4 OD | 0.750 | 19.05 | S34OD-CL |
7/8 OD | 0.875 | 22.23 | S78OD-CL |
1 1/8 OD | 1.125 | 28.58 | S118OD-CL |
1/2 EMT | 0.706 | 17.93 | S12TW-CL |
3/4 EMT | 0.922 | 23.42 | S34TW-CL |
1 EMT | 1.163 | 29.54 | S1TW-CL |
Sasco Pipe Claw for Surface Mounting
For Pipe |
D (diameter) |
Catalogue |
|
(Inches) |
(Inches) | (mm) | |
1/4 OD | 0.250 | 6.35 | S14OD-CLH |
3/8 OD | 0.375 | 9.53 | S38OD-CLH |
1/2 OD | 0.500 | 12.70 | S12OD-CLH |
5/8 OD | 0.625 | 15.88 | S58OD-CLH |
3/4 OD | 0.750 | 19.05 | S34OD-CLH |
7/8 OD | 0.875 | 22.23 | S78OD-CLH |
1 1/8 OD | 1.125 | 28.58 | S118OD-CLH |
1/2 EMT | 0.706 | 17.93 | S12TW-CLH |
3/4 EMT | 0.922 | 23.42 | S34TW-CLH |
1 EMT | 1.163 | 29.54 | S1TW-CLH |