One-Piece Cable Clamps
Sasco One-Piece Cable Clamps secure conduit and cables to both 1 5/8" wide Sasco Strut Channels, and ventilated or ladder cable tray. One-piece construction facilitates fast installation and a range of adjustment allows one cable clamp size to accommodate a range of cable sizes.
Clamps for Single Cables or Conduits:
Catalogue |
Outside Dia. | Rigid Conduit | EMT Conduit | |
Range (In.) | Min (In) | Max (In) | (In) | |
S055 | 0.050 - 0.625 | - | - | 3/8 |
S081 | 0.310 - 0.875 | 3/8 | 1/2 | 3/8 - 1/2 |
S125 | 0.750 - 1.313 | 1/2 | 3/4 | 3/4 - 1 |
S135 | 0.850 - 1.375 | 3/4 | 1 | 3/4 - 1 |
S175 | 1.250 - 1.875 | 1 | 1 1/4 | 1 1/4 - 1 1/2 |
S225 | 1.750 - 2.250 | 1 1/2 | 1 1/2 | 2 |
S275 | 2.250 - 2.875 | 2 | 2 1/2 | - |
S325 | 2.750 - 3.250 | 2 1/2 | 2 1/2 | - |
S375 | 3.250 - 3.813 | 3 | 3 | - |
S425 | 3.750 - 4.500 | 3 1/2 | 4 | - |
S475 | 4.250 - 4.938 | 4 | 4 | - |
Clamps for Two Cables or Conduits:
Catalogue |
Outside Dia. | Rigid Conduit | EMT Conduit | |
Range (In.) | Min (In) | Max (In) | (In) | |
S055D | 0.050 - 0.625 | - | - | 3/8 |
S081D | 0.310 - 0.875 | 3/8 | 1/2 | 3/8 - 1/2 |
S125D | 0.750 - 1.313 | 1/2 | 3/4 | 3/4 - 1 |
S135D | 0.850 - 1.375 | 3/4 | 1 | 3/4 - 1 |
S175D | 1.250 - 1.875 | 1 | 1 1/4 | 1 1/4 - 1 1/2 |
S225D | 1.750 - 2.250 | 1 1/2 | 1 1/2 | 2 |
S275D | 2.250 - 2.875 | 2 | 2 1/2 | - |
S325D | 2.750 - 3.250 | 2 1/2 | 2 1/2 | - |
S375D | 3.250 - 3.813 | 3 | 3 | - |
S425D | 3.750 - 4.500 | 3 1/2 | 4 | - |
S475D | 4.250 - 4.938 | 4 | 4 | - |
Clamps for Three Cables or Conduits:
Catalogue |
Outside Dia. | Rigid Conduit | EMT Conduit | |
Range (In.) | Min (In) | Max (In) | (In) | |
S055T | 0.050 - 0.625 | - | - | 3/8 |
S081T | 0.310 - 0.875 | 3/8 | 1/2 | 3/8 - 1/2 |
S125T | 0.750 - 1.313 | 1/2 | 3/4 | 3/4 - 1 |
S135T | 0.850 - 1.375 | 3/4 | 1 | 3/4 - 1 |
S175T | 1.250 - 1.875 | 1 | 1 1/4 | 1 1/4 - 1 1/2 |
S225T | 1.750 - 2.250 | 1 1/2 | 1 1/2 | 2 |
S275T | 2.250 - 2.875 | 2 | 2 1/2 | - |
S325T | 2.750 - 3.250 | 2 1/2 | 2 1/2 | - |
S375T | 3.250 - 3.813 | 3 | 3 | - |
S425T | 3.750 - 4.500 | 3 1/2 | 4 | - |
S475T | 4.250 - 4.938 | 4 | 4 | - |
This product comes in the following finishes:
Product Suffix:Pre-Galvanized G
Aluminum AL
Stainless Steel Type 316 SS
Add finish to Catalogue Prefix for Part No. (S125T-SS).
Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.
To protect cables on the bearing surface of the strut channel or tray, Counter Beds are available. For the Catalogue Number, add the suffix BED to the required Cable Clamp Catalogue Prefix (S125BED).