Offset Connections
L | Catalogue No. | |
(Inches) | (mm) | |
3 | 76.2 | S208-3A-HG |
3 1/2 | 88.9 | S208-35A-HG |
4 | 101.6 | S208-4A-HG |
L | Catalogue No. | |
(Inches) | (mm) | |
4 | 101.6 | S402U-HG |
5 | 127.0 | S403U-HG |
6 | 152.4 | S404U-HG |
7 | 177.8 | S405U-HG |
8 | 203.2 | S406U-HG |
Depth (D) | Centres (C) | Catalogue No. | ||
(Inches) | (mm) | (Inches) | (mm) | |
2 3/8 | 60.3 | 6 | 152.4 | S780-6HG |
4 3/8 | 111.1 | 8 | 203.2 | S780-8HG |
6 3/8 | 161.9 | 10 | 254.0 | S780-10HG |
8 3/8 | 212.7 | 12 | 304.8 | S780-12HG |
10 3/8 | 263.5 | 14 | 355.6 | S780-14HG |
This product comes in the following finishes:
Product Suffix:Hot Dip Galvanized After Fabrication HG
Electroplated Zinc EG
Stainless Steel Type 304 SS4
Stainless Steel Type 316 SS6
Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.
General Data | (In) | (mm) |
Hole Diameter | 9/16 | 14.3 |
Hole Spacing from End | 13/16 | 20.6 |
Hole Spacing on Centre | 1 7/8 | 47.6 |
Width | 1 1/2 | 38.1 |
Thickness | 1/4 | 6.4 |
Dimensions are to outside edge unless otherwise indicated.