Corner Connections
To assist in the selection of the proper fitting for your application, Sasco fittings, many of which have multiple applications, are grouped according to their most common use.
Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.
Two Hole Flat Plate
S110P-HG
Three Hole Flat Plate
S119P-HG
Three Hole Flat Plate
S122P-HG
Four Hole Flat Plate
S123P-HG
Four Hole Flat Plate
S124P-HG
Five Hole Flat Plate
S125P-HG
Three Hole Tee Plate
S126P-HG
Four Hole Tee Plate
S120P-HG
Four Hole Tee Plate
S127P-HG
Five Hole Tee Plate
S128P-HG
Two Hole 90º Fitting
S206A-HG
Two Hole 90º Fitting
S207A-HG
Three Hole 90º Fitting
S210A-HG
Four Hole Left Angle
S232A-HG
Four Hole Right Angle
S233A-HG
Three Hole 90º Fitting
S528W-HG - Right Hand
S529W-HG - Left Hand (shown)
Four Hole Right Angle
S218A-HG
Four Hole Right Angle
S217A-HG
This product comes in the following finishes:
Product Suffix:Hot Dip Galvanized After Fabrication HG
Electroplated Zinc EG
Stainless Steel Type 304 SS4
Stainless Steel Type 316 SS6
Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.
General Data | (In) | (mm) |
Hole Diameter | 9/16 | 14.3 |
Hole Spacing from End | 13/16 | 20.6 |
Hole Spacing on Centre | 1 7/8 | 47.6 |
Width | 1 1/2 | 38.1 |
Thickness | 1/4 | 6.4 |
Dimensions are to outside edge unless otherwise indicated.