Brackets
The Sasco Brackets illustrated are the most common styles and lengths, and are suitable for wall or strut channel mounting.
Sasco will manufacture custom styles or lengths to meet your requirements.
S681B-HG
Allows for on-site fabrication of brackets. Use with Strut Channels S2, S3, S4, S6BB or S7BB.
Allowable moment for the fitting, only when mounted on 12 gauge vertical Strut, is 5150 in-lbs. Safety factor: 2.5
Inserted strut channel and length may limit capacity.
Standard Finish is defined by the suffix shown while other finishes are also shown. Many of these other finishes are stocked, however some may require custom manufacturing.
S600B Series
Catalogue No. | L | UDL* | |
(Inches) | (Lbs) | (kg) | |
S600B-8HG | 8 | 1100 | 500 |
S600B-14HG | 14 | 550 | 250 |
S600B-20HG | 20 | 350 | 160 |
S600B-26HG | 26 | 250 | 110 |
Custom lengths on request.
Safety Factor: 2.5
S679B Series
Catalogue No. | H | L | UDL* | |
(Inches) | (Inches) | (Lbs) | (kg) | |
S679B-8HG | 8 3/4 | 8 1/2 | 2000 | 905 |
S679B-14HG | 8 3/4 | 14 1/2 | 2000 | 905 |
S679B-20HG | 8 7/8 | 20 1/2 | 1200 | 545 |
S679B-26HG | 8 7/8 | 26 1/2 | 975 | 440 |
S679B-32HG | 11 1/4 | 32 1/2 | 920 | 420 |
S679B-38HG | 11 1/2 | 38 1/2 | 860 | 390 |
*The Uniform Design Load (UDL) values shown are when 12 ga. vertical strut channel is used.
Uprights must be designed to properly support load. When wall mounted, anchors must be of sufficient size to support load.
Note: All holes 9/16” dia., 1.000 inches = 25.40 mm
Safety Factor: 2.5
S655B Series
Catalogue No. | L | UDL* | |
(Inches) | (Lbs) | (kg) | |
S655B-6HG | 6 | 2150 | 975 |
S655B-12HG | 12 | 1900 | 860 |
S655B-18HG | 18 | 1200 | 545 |
S655B-24HG | 24 | 930 | 420 |
S655B-30HG | 30 | 780 | 355 |
S655B-36HG | 36 | 610 | 275 |
Two 1/2” bolts and 1/2” Clamping Nuts are required for mounting (not included).
Safety Factor: 2.5
S665B Series
Catalogue No. | L | UDL* | |
(Inches) | (Lbs) | (kg) | |
S665B-6HG | 6 | 1400 | 635 |
S665B-12HG | 12 | 750 | 340 |
S665B-18HG | 18 | 500 | 225 |
S665B-24HG | 24 | 455 | 205 |
Two 1/2” bolts and 1/2” Clamping Nuts are required for mounting (not included).
Safety Factor: 2.5
S690B Series
Catalogue No. | H | L | A | B | C | UDL* |
(Inches) | (Inches) | (Inches) | (Inches) | (Inches) | (Lbs) | |
S690B-8HG | 4 | 8 1/2 | - | - | - | 820 |
S690B-10HG | 4 | 10 1/2 | 4 1/4 | - | 3 3/4 | 820 |
S690B-12HG | 6 | 12 1/2 | 3 1/4 | 3 | 3 3/4 | 950 |
S690B-14HG | 6 | 14 1/2 | 3 1/4 | 3 | 5 3/4 | 950 |
S690B-16HG | 6 | 16 1/2 | 5 | 3 1/4 | 5 3/4 | 1150 |
S690B-18HG | 6 | 18 1/2 | 5 1/4 | 3 | 7 3/4 | 1090 |
S690B-20HG | 6 | 20 1/2 | 7 1/8 | 3 1/8 | 7 3/4 | 670 |
Two 1/2” bolts and 1/2” Clamping Nuts are required for mounting (not included).
*The Uniform Design Load (UDL) values shown are when 12 ga. vertical strut channel is used. Uprights must be designed to properly support load. When wall mounted, anchors must be of sufficient size to support load.
Note: All holes 9/16” dia., 1.000 inches = 25.40 mm, 1.000 lbs = 0.4536 kg
This product comes in the following finishes:
Product Suffix:Stainless Steel 304SS4
Stainless Steel 316* SS6
Hot Dip Galvanized After Fabrication HG